Search
Due to Rapid Change in Exchange Rate, all the Prices are affected so please re-confirm the prices before ordering
All Categories
    Menu Close

    TP Link MC111CS

    Manufacturer: TP LINK
    Brand TP Link
    Rs 7,499.00
    i h

    What This Product Does
    The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK's media converter MC112CS is just one of the examples to cooperate with MC111CS.

     

    Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19' system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

    • Auto negotiation of 10/100Mbps and auto MDI/MDIX for TX port
    • Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
    • Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
    • Adopts WDM technology, transmitting and receiving data on one single fiber
    • Extend fiber distance up to 20km
    • Easy-to-view LED indicators provide status to monitor network activity easily
    • External power supply
    MEDIA CONVERTER & MODULE
    Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x
    Basic Function Adopts WDM technology
    Half/Full-Duplex transfer mode for FX port
    Full Duplex Flow Control (IEEE 802.3x)
    Half Duplex Flow Control (Backpressure)
    Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
    Extends fiber distance up to 20km
    Ports 1 100M SC port
    1 100M RJ45 port (Auto MDI/MDIX)
    WDM TX 1550nm
    WDM RX 1310nm
    Network Media 10BASE-T UTP category 3, 4, 5 cable (maximum 100m)
    EIA/TIA-568 100Ω STP (maximum 100m)
    Network Media 100BASE-T UTP category 5, 5e cable (maximum 100m)
    EIA/TIA-568 100Ω STP (maximum 100m)
    Network Media 100BASE-FX Single-mode Fiber
    LED Indicators PWR, FDX/Col, Link/Act, SPD
    Dimensions (WDH) 3.72.91.1 in. (94.573.027.0 mm)
    Power Supply External Power Adapter
    Safety & Emission FCC, CE
    Environment Operating Temperature: 0C~40C (32F~104F)
    Storage Temperature: -40C~70C (-40F~158F)
    Operating Humidity: 10%~90% non-condensing
    Storage Humidity: 5%~90% non-condensing
    0.0 0
    Write your own review Close
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *